Reverse

Pimp your bike! With the coloured trigger clamps of Reverse you can now pimp another component on your bike!

Material
Aluminum

Features
For Sram-Trigger-Shifters (incl. screw)
Weight: 11g

Color
Dark Green

Material
Aluminum 7075
Brass washer

Features
Size: 34,9mm
Allen screw (quick release): 5mm
Weight: 46g

Color
Silver

The set includes 2x10mm and 2x5mm in one color.

Material
Aluminum

Features
For 1 1/8" steerer tubes (Ø28,6mm)
Size and weight:
5mm (2,6g)
10mm (4,7g)

Color
Red

The set includes 2x10mm and 2x5mm in one color.

Material
Aluminum

Features
For 1 1/8" steerer tubes (Ø28,6mm)
Size and weight:
5mm (2,6g)
10mm (4,7g)

Color
Gold

The set includes 2x10mm and 2x5mm in one color.

Material
Aluminum

Features
For 1 1/8" steerer tubes (Ø28,6mm)
Size and weight:
5mm (2,6g)
10mm (4,7g)

Color
Blue

The set includes 2x10mm and 2x5mm in one color.

Material
Aluminum

Features
For 1 1/8" steerer tubes (Ø28,6mm)
Size and weight:
5mm (2,6g)
10mm (4,7g)

Color
Orange

Reverse Twister Crown Race Ring.

Features
Crown Race ring 1.5"
Reduced to 1 1/8"
Weight: 13g
For 1 1/8" fork Ø 50mm + 56mm

1 Stem - 2 Handlebar Diameters. The Black One Direct Mount D-2 revolutionises your DH bike. As the successor to the legendary Black One Direct Mount stem, this innovative stem finally allows you to ride with both handlebar diameters. The included reducer shim allows you to use handlebars with a diameter of Ø31.8 mm. If you remove the sleeve, you get a Ø35 mm stem - flexible and adaptable.

The two-piece design seamlessly integrates into your cockpit, giving it a burly and refined finish. The two-part design of the stem and reducer sleeve enables effortless handlebar installation without having to dismantle existing components like brakes or grips.

The intelligent and seamless clamping design in the lower area ensures that there are no pinch points or sharp edges. Instead, the clamping forces are evenly distributed, increasing safety and creating optimal technical conditions, especially useful for carbon handlebars. This is particularly important as most loads and notches always occur at the lower part of the handlebars. Furthermore, our smooth and seamless clamping surface extends the lifespan of your handlebar.

The stem has been certified according to the E-Safety Level with Category 5 (Maximum) and has successfully passed the EFBE E-MTB Tri Test (EPAC MTB-GR). This guarantees the highest safety and quality for your riding experience. Experience flexibility and performance with the Black One Direct Mount D-2 stem.

The replacement sprocket for the Reverse Components HG Singlespeed Kit.
Made from high-strength steel, CNC milled in Germany.

The set includes 2x10mm and 2x5mm in one color.

Material
Aluminum

Features
For 1 1/8" steerer tubes (Ø28,6mm)
Size and weight:
5mm (2,6g)
10mm (4,7g)

Color
Purple

The Comp seatpost provies a reliable, easily adjustable option for riders with 31.6 mm frames.

Features
- Length: 350 mm
- Ø: 31.6 mm
- Weight: 339 g (+/- 5% weight tolerance)
- Material: Aluminium

Color
Black

Material
Aluminum 7075
Brass washer

Features
Size: 34,9mm
Allen screw (quick release): 5mm
Weight: 46g

Color
Red

Material
Aluminum 7075
Brass washer

Features
Size: 34,9mm
Allen screw (quick release): 5mm
Weight: 46g

Color
Purple

Material
Aluminum 7075
Brass washer

Features
Size: 34,9mm
Allen screw (quick release): 5mm
Weight: 46g

Colors
Sand-Metallic

Material
Aluminum 7075

Features
Size: 34,9mm
Allen screw: 5mm
Weight: 26g

Color
Sand-Metallic

Material
Aluminum 7075
Brass washer

Features
Size: 31,8mm
Allen screw (quick release): 5mm
Weight: 44g

Color
Black

Features
Weight: 8g
Bolt: M6/32mm

Material
Aluminum

Color
Gold

Pimp your bike! With the coloured trigger clamps of Reverse you can now pimp another component on your bike!

Material
Aluminum

Features
For Sram-Trigger-Shifters (incl. screw)
Weight: 11g

Color
Dark Blue

Pimp your bike! With the coloured trigger clamps of Reverse you can now pimp another component on your bike!

Material
Aluminum

Features
For Sram-Trigger-Shifters (incl. screw)
Weight: 11g

Color
Orange

Pimp your bike! With the coloured trigger clamps of Reverse you can now pimp another component on your bike!

Material
Aluminum

Features
For Sram-Trigger-Shifters (incl. screw)
Weight: 11g

Color
Black

Når Nico ba om en setepinne som var bombesikker og lett å justere var det nettopp 
dette Reverse lagde for han!

Nico trenger komponenter han kan stole på under alle omstendigheter, og takket være det nye festehodet er det nå ekstra enkelt å finjustere vinkler og seteposisjon.
Denne alumiumssetepinnen et så robust at når det ble testet i et EFBE labratorie måtte de skru av test apparatet slik at maskinen ikke skulle bli ødelagt!

 "Thanks to the super fine adjustment possibilities and the easy-to-use seat post head, I can adjust my saddle perfectly. Besides that, I like the robustness of my seat-post!"

-Nico Vink

- Length: 350 mm
- Ø: 30.9/31,6 mm
- Weight: 269 g (+/- 5% weight tolerance)
- Material: Aluminium

Our base handlebar is one of the most popular handlebars in the community. With a width of 790 mm, it can be used in Downhill as well as for All mountain and Enduro riding.

A wide handlebar is still the best choice to put as much pressure on the front wheel as possible and supports the driver in the best possible way. Built from double butted 7075 aluminium, this handlebar always gives you confidence and safety, even for toughest abuse!

The handlebar shown here with a clamping size of 31.8 mm, which is still the most used diameter on the market. The two rise versions of the Base 790 make it easy to fit the individual needs of riders and adapt the cockpit to personal preferences. Our Base handlebars are available in different colours and can be combined to any conceivable frame colour!

Features
- Width: 790 mm
- Ø: 31.8 mm
- Rise: 35 mm
- Backsweep: 7°
- Upsweep: 5°
- Weight: 303 g (+/- 5% weight tolerance)
- Material: Aluminium 7075 (double butted)

Extras
- Reverse stem alignment lines: for orientation when mounting on the stem

Color
Titangrey

Duncan Shaw Signature

We initially designed and built the Deviant as a trial handlebar for our pro rider Duncan Shaw. After teaming up with Duncan, we had a meeting with him at the Eurobike where he performed as part of the Drop & Roll tour with Danny McAskill. During this conversation we talked about handlebars as well, which is very important to Duncan! So we thought about how to fulfil this wish of Duncan.

The outcome was the Deviant handlebar which is primarily intended for trials. However, we soon noticed that this handlebar is very popular among our customers as a high-rise bar for any use. Due to its rise of 76 mm and its pleasingly backsweep of 9°, this handlebar allows an extremely upright position on the bike, for leisure and daily commuting rides!

Features
- Width: 730 mm
- Ø: 31.8 mm
- Rise: 76 mm
- Backsweep: 9°
- Upsweep: 5°
- Weight: 358 g (+/- 5% weight tolerance)
- Material: Aluminium 7075-T6

Extras
- Reverse stem alignment lines: for orientation when mounting on the stem
- Cutting lines: for orientation when shortening the handlebar

Color
Black/White

Bar width has to match shoulder width and armspan. That´s why we created the Youngstar handlebar, to have a handlebar that matches the size and position to give younger riders more control, which equals more fun!

The Youngstar handlebar is a lightweight 6061 T6 aluminium handlebar, 560 mm wide with a 22 mm rise. This fits well for riders under 12 years old or approx. 130-150 cm in height. The reduced width and high rise puts them in an optimum position to lift the wheel off the ground, make changes in position and to actively control the bike. We increased the backsweep slightly to bring the bars in towards the riders hands, to increase control further.

The result is a lightweight, high spec handlebar, with custom ergonomics that allow your child to shred the trail with more confidence and control.

The handlebar comes with a free "Born to Ride" mudfender, worth 6.90 €

Features
- Width: 560 mm
- Ø 31.8 mm
- Rise: 22 mm
- Upsweep: 5°
- Backsweep: 9°
- Weight: 267 g (+/- 5% weight tolerance)
- Material: Aluminium 6061

Color
Black

Extras
- Child-friendly geometry
- Reverse stem alignment lines: for orientation when mounting on the stem