Reverse

Maximum grip - light weight
These are the key features of our Black ONE pedal. From the very beginning we designed this pedal to combine maximum durability and shape with the lowest possible weight. This fully CNC machined pedal builds super flat to ensure maximum ground clearance when shredding through rough terrain. For the bearings we make no compromises and use a combination of needle- and multi sealed ball bearings.

When taken out of the box, the pedal spins a bit slow, but this is how it is supposed to be. This prevents the pedal from spinning, if you have to get your foot off the pedal in tight switchback manoeuvres!

We offer our Black ONE pedal with different coloured pins to make the choice on the respective bike as individual as possible.
In addition to the standard aluminium pins, we also offer robust steel pins in different colours for this pedal.

Features
- Pedal size: 100 x 100 mm
- Height: 15 mm
- Pedal thread: 9/16"
- Bearings: 1 x german IGUS DU Bushing / 2 x industrial bearings
- Pin height: 5 mm above the pedal
- Pin Setup: 20 aluminium pins per pedal (US Size 6/32")
- Weight: 309 g in pair (+/- 5% weight tolerance)
- Material: Aluminium - super light weight (pedal) / CrMo (axle)

Extras
- 1 x german IGUS DU Bushing / 2 x industrial bearings
- High strength CrMo axle
- Pedal washer: to protect the crankset thread

Color
Black (Pedal)
Black (Pins)

Han trengte et sete som var solid, og med en form som ville gi maksimal bevegelighet, og samtidig være lett å klemme knærne rundt ved triks.

Setet er forsterket med kevlar på utsatte steder, og gir en perfekt blanding av frihet og kontroll på sykkelen.

Martin hos oss har også brukt dette setet i over ett år, på alt fra utfor til sti og dirt jump. 
Setet gjør alt det som det sier at det skal, men det er også overraskende digg på stisykkel, og man kan bruke det som et faktisk sete, ikke bare for freeride!

"I love this saddle. It gives me the freedom of movement that I need on my bike to move it the way I want !”

-Nico Vink

- Length: 235 mm
- Width: 127 mm
- Weight: 260 g (+/- 5% weight tolerance)
- Material: CrMo (frame) / kevlar (edge protection) / vinyl (saddle cover)

Nico stoler på dette styret!
Uansett om det er Red Bull rampage, Fest Series events eller på stisykkelen.

Dette ekstra tykke styret er designet for lek, og å være 
så sterkt som mulig. Det er hvorfor SAMTLIGE syklister i Fest Series bruker det.

Reverse har laget styret etter Nico Vink sine egne spesifikasjoner og preferanser,
derav bærer det hans logo.

Styret tilbys i tre forskjellige variasjoner med 31.8mm clamp.
18, 35 og 48mm rise - 48mm styret er det samme som Nico bruker på sine sykler.

Martin hos oss har også brukt dette styret i over ett år, på alt fra utfor til sti og dirt jump. Ønsker du innspill og tips på hva slags rise du burde ha? Ikke nøl med å kontakte oss!

“There is no other part on my Bike I have to rely on more than the handlebar. And I have absolute trust in this one!
Thanks to the different Rise options it perfectly fits on all of my different Bikes "

-Nico Vink

- Width: 810 mm
- Ø: 31.8 mm
- Rise: 18 mm
- Upsweep: 5°
- Backsweep: 7°
- Weight: 389 g (+/- 5% weight tolerance)
- Material: Aluminium 7075 (double butted)

- Extra reinforced 7075 Aluminium for highest resistance to stress
- Cutting lines: for orientation when shortening the handlebar
- Reverse stem alignment lines: for orientation when mounting on the stem

Nico Vink signature grips er laget etter Nico's spesifikasjoner.
De er no fuz, relativt tynne og med en spesiell struktur på lamellene som alltid lar deg ha full kontroll på styret ditt! 

"What I like most about this grip is that it always does what it should!
Perfect grip, feedback and damping even when it's hard and rough.
The width and the diameter fit perfectly to my hands and the Lock Rings with the Chip Bar Ends have taken any abuse I put onto them so far! "

-Nico Vink

- Grip pattern: Reverse lamellar
- Diameter: Ø 30 mm
- Width: 130 mm
- Weight: 109 g (+/- 5% weight tolerance)
- Material: Reverse medium compound / aluminium (lock rings + chip bar-ends)

Reverse Can Holder er designet for bokser med en kapasitet på 0,33 liter. 

Denne can holderen er et blikkfang, enten på stien eller i bike parken. Ingenting er vel bedre enn en forfriskende tørsteslukker etter en flott dag på sykkelen. Med vinden til å kjøle ned, smaker drikken dobbelt så godt når den er festet i holderen.

Can Holderen er et resultat av samarbeidet mellom Reverse Components og Team Dosenbier. Mekanismen på undersiden av holderen gjør det enkelt å klikke boksen inn og ut, selv etter de tøffeste nedstigningene.

Takket være 3D-Print, har vi oppnådd en lett, men samtidig stabil og funksjonell konstruksjon. I tillegg til å feste en boks, har Can Holderen to ekstra guider for zip ties, noe som gjør det mulig å feste annet utstyr (for eksempel en slange) til holderen.

Produktdetaljer:

• Vekt: 22 g (+/- 5 % vekttoleranse)
• Dimensjoner: 140 x 25 x 65 mm (L x B x H)
• Materiale: Høy styrke 3D-Printet PLA
• Holder: Standard flaskeholder

Colour match your ride! Our 2 piece alloy / steel disc rotor gives you a ton of options for your custom build. Our high performance steel braking surface provides you the optimum brake power and the alloy spider keeps the weight low.
Available for all brake models.

Features
- Size: 203 mm
- Wall thickness: 1.8 mm
- Mount: IS 6 bolt
- Compatibility: No restrictions
- Weight: 185 g (+/- 5% weight tolerance)
- Material: Steel (Disc) / Aluminium (Star)

Extras
- Anodized and laser engraved

Color
Black

Our high performance steel rotors provide you optimum stopping power and the full steel design is long lasting and reliable, even under harsh conditions. Available for all brake models.

Material
High performance steel

Features
Size: 180mm
Mount: IS 6 bolt
Compatibility: No restrictions
Weight: 144g
Finish: laser atched

Less heat = more power
Heat Management is the major problem for most brake systems. This is why we worked in the development process with one of the biggest brake suppliers in the industry to develop a solution to improve performance. We came up with the AirCon System - an efficient heat dissipation system for all brakes.

Due to a clever and simple 3 piece Disc Rotor with cooling fins we were able to reduce the maximum temperature of the brake. In fact, 50 °C less temperature after a one minute braking - and the disc recovered to room temperature 20sec earlier.

What you will experience on the trail is that your brake will not fade that easy and that your brake will have more power due to the optimized heat dissipation. Combine our AirCon disc with our new AirCon Disc Pads to increase the function of the system even further.

Features
- Size: 203 mm
- Mount: IS 6 bolt
- Compatibility: No restrictions (except for Fox 32, QR15 x 100)
- Weight: 218 g (+/- 5% weight tolerance)
- Material: Steel (Disc) / Aluminium (Cooling fins and Star)

Extras
- Improved cooling rate by up to 7 %, better braking performance
- Anodized and laser engraved

Color
Black

Coloured steel Disc Rotor Bolts.

Material
Steel S10B21 / class 10.9

Features
12 x Torx T25 screws M5 x 10mm
Weight: 26g (+/- 5% production tolerance)

Color
Gold

Compatibility
Shimano XTR BR-M975, BR-M966, BR-M965, XT BR-M776, BR-M775, BR-M765, SLX BR-M665

Material
Steel back plate and organic pad
Weight: 18g

Color
Green

Our organic brake pads offer:
- Long life
- Very good cold braking performance
- Very good braking performance on cold, dryness or wetness
- Optimal braking and long life in the mid-temperature range
- Low noise
- Creates possibly the remedy at disturbing brake noise
- Asbestos free

Our sintered metal pads offer:
(Sintered metal pads are not provided for all Brake Models)
- Long life
- Very good braking performance at very high temperatures and high-speed
- Consistent Braking at high continuous loading
- Optimal braking action and long life at very high temperatures
- Very good braking performance in dry or wet conditions
- Asbestos free

Recommendation and information on the application range of different REVERSE brake pad types:
What is to be used - sintered metal or organic brake pads?

REVERSE Components brake pads are perfectly suited for all biker of Tour / XC to DH!

The REVERSE Organic brake lining unfolds the full braking force already in the cold state. In extreme range at high temperatures with constant load, the wear is slightly larger.

Sintered metal pads have their full braking force in the middle to high temperature range and are therefore somewhat more durable under extreme loads. When cold, the sintered metal pads are a little less "snappy" as an Organic brake pad. But only briefly in the beginning with the first 1-2 braking maneuvers. Then the pad is at operating temperature. However, it does not mean that a cold sintered metal brake pad brakes bad! But a small difference is noticeable!

Conclusion: In most cases, 80% of drivers with the Organic brake pads are perfectly equipped, because the price / performance and braking behavior. Furthermore, Organic suitable coverings to in brake systems with brake disturbing noises (squealing or stutter) any remedy. Furthermore, organic brake pads can reduce disturbing brake noise (squeak or stutter) in brake systems.

For drivers who often within the extreme range of the braking load are the sintered metal models a way to increase the long life!

Compatibility
Formula R1 Racing, The one, R1, RX, Mega

Material
Steel back plate and organic pad
Weight: 20g

Color
Green

Our organic brake pads offer:
- Long life
- Very good cold braking performance
- Very good braking performance on cold, dryness or wetness
- Optimal braking and long life in the mid-temperature range
- Low noise
- Creates possibly the remedy at disturbing brake noise
- Asbestos free

Our sintered metal pads offer:
(Sintered metal pads are not provided for all Brake Models)
- Long life
- Very good braking performance at very high temperatures and high-speed
- Consistent Braking at high continuous loading
- Optimal braking action and long life at very high temperatures
- Very good braking performance in dry or wet conditions
- Asbestos free

Recommendation and information on the application range of different REVERSE brake pad types:
What is to be used - sintered metal or organic brake pads?

REVERSE Components brake pads are perfectly suited for all biker of Tour / XC to DH!

The REVERSE Organic brake lining unfolds the full braking force already in the cold state. In extreme range at high temperatures with constant load, the wear is slightly larger.

Sintered metal pads have their full braking force in the middle to high temperature range and are therefore somewhat more durable under extreme loads. When cold, the sintered metal pads are a little less "snappy" as an Organic brake pad. But only briefly in the beginning with the first 1-2 braking maneuvers. Then the pad is at operating temperature. However, it does not mean that a cold sintered metal brake pad brakes bad! But a small difference is noticeable!

Conclusion: In most cases, 80% of drivers with the Organic brake pads are perfectly equipped, because the price / performance and braking behavior. Furthermore, Organic suitable coverings to in brake systems with brake disturbing noises (squealing or stutter) any remedy. Furthermore, organic brake pads can reduce disturbing brake noise (squeak or stutter) in brake systems.

For drivers who often within the extreme range of the braking load are the sintered metal models a way to increase the long life!

This 4-piece repair set is a lifesaver in the event of a large puncture when out on the trail. With a few simple steps, punctures can be repaired quickly, to get you back on the trail , with no pushing that bike back home. The kit includes the rasp tool, insertion tool and a bunch of Repair-strip to fill holes in the tire that your sealant can't fill.
Repair-strip refill packs are also available!

Features
1 x rasp tool
1 x insert tool
5 x Repair-strip 1,5 mm
5 x Repair-strip 3,5 mm
Weight: 29g

Compatibility: Only with our AirCon Cooling Fins!
Shimano: Saint/Zee

Our AirCon Replacement Pads are suitable for our AirCon Cooling Fins and are made with an extremely thin alloy backplate to fit in the caliper. No need to buy expensive brake pads with fins, just reuse the fins and save resources.

Material
Steel back plate and organic pad

Benefit: Reuse your AirCon cooling fins to save money and save the planet.

Weight: 16g

Coloured steel Disc Rotor Bolts.

Material
Steel S10B21 / class 10.9

Features
12 x Torx T25 screws M5 x 10mm
Weight: 26g (+/- 5% production tolerance)

Color
Red

Coloured steel Disc Rotor Bolts.

Material
Steel S10B21 / class 10.9

Features
12 x Torx T25 screws M5 x 10mm
Weight: 26g (+/- 5% production tolerance)

Color
Black

Colour match your ride! Our 2 piece alloy / steel disc rotor gives you a ton of options for your custom build. Our high performance steel braking surface provides you the optimum brake power and the alloy spider keeps the weight low.
Available for all brake models.

Features
- Size: 203 mm
- Wall thickness: 1.8 mm
- Mount: IS 6 bolt
- Compatibility: No restrictions
- Weight: 185 g (+/- 5% weight tolerance)
- Material: Steel (Disc) / Aluminium (Star)

Extras
- Anodized and laser engraved

Color
Blue

Less heat = more power
Heat Management is the major problem for most brake systems. This is why we worked in the development process with one of the biggest brake suppliers in the industry to develop a solution to improve performance. We came up with the AirCon System - an efficient heat dissipation system for all brakes.

Due to a clever and simple 3 piece Disc Rotor with cooling fins we were able to reduce the maximum temperature of the brake. In fact, 50 °C less temperature after a one minute braking - and the disc recovered to room temperature 20sec earlier.

What you will experience on the trail is that your brake will not fade that easy and that your brake will have more power due to the optimized heat dissipation. Combine our AirCon disc with our new AirCon Disc Pads to increase the function of the system even further.

Features
- Size: 180 mm
- Mount: IS 6 bolt
- Compatibility: No restrictions (except for Fox 32, QR15 x 100)
- Weight: 149 g (+/- 5% weight tolerance)
- Material: Steel (Disc) / Aluminium (Cooling fins and Star)

Extras
- Improved cooling rate by up to 7 %, better braking performance
- Anodized and laser engraved

Color
Black

Less heat = more power
Heat Management is the major problem for most brake systems. This is why we worked in the development process with one of the biggest brake suppliers in the industry to develop a solution to improve performance. We came up with the AirCon System - an efficient heat dissipation system for all brakes.

Due to a clever and simple 3 piece Disc Rotor with cooling fins we were able to reduce the maximum temperature of the brake. In fact, 50 °C less temperature after a one minute braking - and the disc recovered to room temperature 20sec earlier.

What you will experience on the trail is that your brake will not fade that easy and that your brake will have more power due to the optimized heat dissipation. Combine our AirCon disc with our new AirCon Disc Pads to increase the function of the system even further.

Features
- Size: 160 mm
- Mount: IS 6 bolt
- Compatibility: No restrictions (except for Fox 32, QR15 x 100)
- Weight: 126 g (+/- 5% weight tolerance)
- Material: Steel (Disc) / Aluminium (Cooling fins and Star)

Extras
- Improved cooling rate by up to 7 %, better braking performance
- Anodized and laser engraved

Color
Black

Coloured steel Disc Rotor Bolts.

Material
Steel S10B21 / class 10.9

Features
12 x Torx T25 screws M5 x 10mm
Weight: 26g (+/- 5% production tolerance)

Color
Green

Material
Steel

Features
4 x Allen screw M6 x 18mm
Weight: 23g (+/- 5% production tolerance)

Color
Purple

Material
Steel

Features
4 x Allen screw M6 x 18mm
Weight: 23g (+/- 5% production tolerance)

Color
Blue

Features
Weight: 8g
Bolt: M6/32mm

Material
Aluminum

Color
Gold

Features
Weight: 8g
Bolt: M6/32mm

Material
Aluminum

Color
Red