Reverse

For Tubeless riding (Tubeless Adapter Ventil Set for Tubless Ready rims).

Features:
- 2 pieces
- Width: 56 mm
- Valve type: (Presta/Sclaverand/French)
- Material: brass
- Weight: 17.8 g

To keep your face and butt clean on muddy days.
Can be cutt easy to your needed size if neccesary.
For fork or rear wheel.

Features
Size: 267x251mm (width x height)
Weight: 26g

Color
Black/White (United in Shred)

Material
Plastic

To keep your face and butt clean on muddy days.
Can be cutt easy to your needed size if neccesary.
For fork or rear wheel.

Features
Size: 267x251mm (width x height)
Weight: 26g

Color
Black/White (Supporting Riders)

Material
Plastic

To keep your face and butt clean on muddy days.
Can be cutt easy to your needed size if neccesary.
For fork or rear wheel.

Features
Size: 267x251mm (width x height)
Weight: 26g

Color
Black/White (Ride Fucking Downhill)

Material
Plastic

Features
1 piece 26" rim tape super strong
Width: 14mm
Weight: 25g

The steerer clamp is a headset spacer with an additional clamping function, designed to go underneath your stem for double security.
Not only does this ensure that your headset holds well, it's ideal for working/travelling with your bike.
If you have the bike in the work stand, you can tighten the steerer clamp and I'll hold everything in place when you loosen your stem and headset.
If you're removing/turning your bars for travelling, this'll keep everything in place until you arrive at your destination.

Features
- Inner diameter 1 1/8" (Ø28.6)
- Assembly height: 10 mm
- Weight: 13.8 g (+/- 5% weight tolerance)
- Material: Aluminium

The set includes 2x10mm and 2x5mm in one color.

Material
Aluminum

Features
For 1 1/8" steerer tubes (Ø28,6mm)
Size and weight:
5mm (2,6g)
10mm (4,7g)

Color
Green

With this pedal, we've worked to improve shredding for young riders, with better ergonomics to suit smaller feet. With kids bikes being lighter and more capable than ever, it's time to get the components to fit the smaller proportions that kids have.

In our opinion this topic gets too little attention by the bicycle industry. Be it with the Q-factor of the children's bicycles or the oversized pedal surface of the pedals for children's feet!

Both the Q-factor and the support surface of the shoe on the pedal body, were taken into consideration during the development of the Youngstar pedal. The extra-short pedal axle allows a significantly lower Q-factor, which stops the legs being forced into the bow legged "X-position".

This makes it much easier for the kids and leads to a more circular rotations. Due to the smaller pedal surface for kids feet, the pedal flipping is reduced. Imagine you have to stand on a pedal the size of an A4 sheet! You will definitely tip backwards or forwards, since you could never really stand on the middle of such a pedal! The Youngstar is much smaller, making it much easier to find the point of balance.
With its weight of just 229 g, this aluminium pedal pair with CrMo axle is tough, durable but will be lighter than most pedals out there.

Note: Fits for children up to shoe size 34 (US size 3).

Features
- Pedal size: 70 x 62 mm
- Pedal height: 20 mm
- Pedal thread: 9/16"
- Bearings: 2 x industrial bearing
- Weight: 229 g in pair (+/- 5% weight tolerance)
- Material: Aluminium (pedal) CrMo (axle)

Extras
- Shortened pedal axle
- Adapted pedal body
- CrMo axle
- Sealed industrial bearings
- Pedal washer: to protect the crankset thread
- Height adjustable pins (0 mm to 4 mm)

Color
Black

To assemble the ISCG-05 chain guide to a frame without ISCG-05.

Color
Black

Customise your ride. Now you are able to match your brake adaptors to the rest of your custom build. Available in a range of colours.

Material
Aluminum

Features
PM-PM 180mm
Disc-Brake-Adapter from 160mm to 180mm
Use on front and rear wheel for 180mm disc rotors (AVID)
Weight: 12,5g

Color
Orange

Customise your ride. Now you are able to match your brake adaptors to the rest of your custom build. Available in a range of colours.

Material
Aluminum

Features
PM-PM 200mm
Disc-Brake-Adapter from 160mm to 200mm
Use on front wheel for 200mm disc rotors (AVID & more)
Weight: 23g

Color
Blue

Customise your ride. Now you are able to match your brake adaptors to the rest of your custom build. Available in a range of colours.

Material
Aluminum

Features
PM-PM 200mm
Disc-Brake-Adapter from 160mm to 200mm
Use on front wheel for 200mm disc rotors (AVID & more)
Weight: 23g

Color
Gold

Compatibility: Only with our AirCon Cooling Fins!
Avid: Elixir

Our AirCon Replacement Pads are suitable for our AirCon Cooling Fins and are made with an extremely thin alloy backplate to fit in the caliper. No need to buy expensive brake pads with fins, just reuse the fins and save resources.

Material
Steel back plate and organic pad

Benefit: Reuse your AirCon cooling fins to save money and save the planet.

Weight: 14g

Compatibility
Avid: Elixir

With our AirCon Brakepad System you will be able to install cooling fins to your brake. The fins are not attached to the pad, so that you can reuse the fins and produce less waste. Apart from the cool look it will reduce the heat in your brake caliper up to 9%. Now everyone can benefit from a simple brake tuning and run our AirCon Disc Pads.
Another benefit is that you just need to buy the AirCon Sytem once and can replace the pads with our AirCon Replacement Pads seperatly.

Material
Aluminum Cooling Fins, organic pad

Benefit: Cooling rate increased up to 9%, better brake performance, reuseable cooling fins
Finish: Anodized and laser etched

Weight: 25g

Compatibility
Avid: Code

With our AirCon Brakepad System you will be able to install cooling fins to your brake. The fins are not attached to the pad, so that you can reuse the fins and produce less waste. Apart from the cool look it will reduce the heat in your brake caliper up to 9%. Now everyone can benefit from a simple brake tuning and run our AirCon Disc Pads.
Another benefit is that you just need to buy the AirCon Sytem once and can replace the pads with our AirCon Replacement Pads seperatly.

Features
Weight: 32g

Material
Aluminum Cooling Fins, organic pad

Benefit: Cooling rate increased up to 9%, better brake performance, reuseable cooling fins
Finish: Anodized and laser etched

Compatibility
Avid Juiyc 3/5/7, carbon, Ultimate BB7 Mechanical

Material
Steel back plate and organic pad
Weight: 22g

Color
Green

Our organic brake pads offer:
- Long life
- Very good cold braking performance
- Very good braking performance on cold, dryness or wetness
- Optimal braking and long life in the mid-temperature range
- Low noise
- Creates possibly the remedy at disturbing brake noise
- Asbestos free

Our sintered metal pads offer:
(Sintered metal pads are not provided for all Brake Models)
- Long life
- Very good braking performance at very high temperatures and high-speed
- Consistent Braking at high continuous loading
- Optimal braking action and long life at very high temperatures
- Very good braking performance in dry or wet conditions
- Asbestos free

Recommendation and information on the application range of different REVERSE brake pad types:
What is to be used - sintered metal or organic brake pads?

REVERSE Components brake pads are perfectly suited for all biker of Tour / XC to DH!

The REVERSE Organic brake lining unfolds the full braking force already in the cold state. In extreme range at high temperatures with constant load, the wear is slightly larger.

Sintered metal pads have their full braking force in the middle to high temperature range and are therefore somewhat more durable under extreme loads. When cold, the sintered metal pads are a little less "snappy" as an Organic brake pad. But only briefly in the beginning with the first 1-2 braking maneuvers. Then the pad is at operating temperature. However, it does not mean that a cold sintered metal brake pad brakes bad! But a small difference is noticeable!

Conclusion: In most cases, 80% of drivers with the Organic brake pads are perfectly equipped, because the price / performance and braking behavior. Furthermore, Organic suitable coverings to in brake systems with brake disturbing noises (squealing or stutter) any remedy. Furthermore, organic brake pads can reduce disturbing brake noise (squeak or stutter) in brake systems.

For drivers who often within the extreme range of the braking load are the sintered metal models a way to increase the long life!

Simple, short and burly
This fully CNC machined stem has been developed and designed for the All Mountain and Enduro use. It's short 40 mm length making it perfect for achieving a fast handling ride. But many of our slopestyle athletes are loving the BASE!

Its stability and its short length and low height make this stem a popular dirt and slopestyle stem that you can rely on in every situation!

Features
- Length: 40 mm
- Clamping diameter: 31.8 mm
- Ø head tube: 1 1/8"
- Angle: 0°
- Stack height: 38 mm
- Clamping platform: 44 mm
- Weight: 170 g (+/- 5% weight tolerance)
- Construction type: CNC machined
- Material: Aluminium 6061 T-6

Color
Black (glossy)

Pimp your bike! With the coloured trigger clamps of Reverse you can now pimp another component on your bike!

Material
Aluminum

Features
For Sram-Trigger-Shifters (incl. screw)
Weight: 11g

Color
Light Green

Features
Weight: 8g
Bolt: M6/32mm

Material
Aluminum

Color
Orange

Features
Weight: 8g
Bolt: M6/32mm

Material
Aluminum

Color
Lightgreen

Features
Weight: 8g
Bolt: M6/32mm

Material
Aluminum

Color
Darkblue

To keep your face and butt clean on muddy days.
Can be cutt easy to your needed size if neccesary.
For fork or rear wheel.

Features
Size: 267x251mm (width x height)
Weight: 26g

Color
Black/White (Fist)

Material
Plastic

To keep your face and butt clean on muddy days.
Can be cutt easy to your needed size if neccesary.
For fork or rear wheel.

Features
Size: 267x251mm (width x height)
Weight: 26g

Color
Black/White (Braaap)

Material
Plastic