Reverse

Customise your ride. Now you are able to match your brake adaptors to the rest of your custom build. Available in a range of colours.

Material
Aluminum

Features
PM-PM 200mm
Disc-Brake-Adapter from 160mm to 200mm
Use on front wheel for 200mm disc rotors (AVID & more)
Weight: 23g

Color
Light-Blue

Compatibility: Only with our AirCon Cooling Fins!
Shimano: XTR after 2012

Our AirCon Replacement Pads are suitable for our AirCon Cooling Fins and are made with an extremely thin alloy backplate to fit in the caliper. No need to buy expensive brake pads with fins, just reuse the fins and save resources.

Material
Steel back plate and organic pad

Benefit: Reuse your AirCon cooling fins to save money and save the planet.

Weight: 14g

Compatibility: Only with our AirCon Cooling Fins!
Avid X0 Trail, Elixir 9 trail, Elixir 7 Trail, Sram Guide Ultimate, RSC, RS, R

Our AirCon Replacement Pads are suitable for our AirCon Cooling Fins and are made with an extremely thin alloy backplate to fit in the caliper. No need to buy expensive brake pads with fins, just reuse the fins and save resources.

Material
Steel back plate and organic pad

Benefit: Reuse your AirCon cooling fins to save money and save the planet.

Weight: 14g

Our high performance steel rotors provide you optimum stopping power and the full steel design is long lasting and reliable, even under harsh conditions. Available for all brake models.

Material
High performance steel

Features
Size: 140mm
Mount: IS 6 bolt
Compatibility: No restrictions
Weight: 101g
Finish: laser atched

Compatibility
Formula: Mega One: IS 6 bolt

With our AirCon Brakepad System you will be able to install cooling fins to your brake. The fins are not attached to the pad, so that you can reuse the fins and produce less waste. Apart from the cool look it will reduce the heat in your brake caliper up to 9%. Now everyone can benefit from a simple brake tuning and run our AirCon Disc Pads.
Another benefit is that you just need to buy the AirCon Sytem once and can replace the pads with our AirCon Replacement Pads seperatly.

Material
Aluminum Cooling Fins, organic pad

Benefit: Cooling rate increased up to 9%, better brake performance, reuseable cooling fins
Finish: Anodized and laser etched

Weight: 26g

Compatibility
Avid Juiyc 3/5/7, carbon, Ultimate BB7 Mechanical

Material
Sintermetal
Weight: 26g

Color
Green

Our organic brake pads offer:
- Long life
- Very good cold braking performance
- Very good braking performance on cold, dryness or wetness
- Optimal braking and long life in the mid-temperature range
- Low noise
- Creates possibly the remedy at disturbing brake noise
- Asbestos free

Our sintered metal pads offer:
(Sintered metal pads are not provided for all Brake Models)
- Long life
- Very good braking performance at very high temperatures and high-speed
- Consistent Braking at high continuous loading
- Optimal braking action and long life at very high temperatures
- Very good braking performance in dry or wet conditions
- Asbestos free

Recommendation and information on the application range of different REVERSE brake pad types:
What is to be used - sintered metal or organic brake pads?

REVERSE Components brake pads are perfectly suited for all biker of Tour / XC to DH!

The REVERSE Organic brake lining unfolds the full braking force already in the cold state. In extreme range at high temperatures with constant load, the wear is slightly larger.

Sintered metal pads have their full braking force in the middle to high temperature range and are therefore somewhat more durable under extreme loads. When cold, the sintered metal pads are a little less "snappy" as an Organic brake pad. But only briefly in the beginning with the first 1-2 braking maneuvers. Then the pad is at operating temperature. However, it does not mean that a cold sintered metal brake pad brakes bad! But a small difference is noticeable!

Conclusion: In most cases, 80% of drivers with the Organic brake pads are perfectly equipped, because the price / performance and braking behavior. Furthermore, Organic suitable coverings to in brake systems with brake disturbing noises (squealing or stutter) any remedy. Furthermore, organic brake pads can reduce disturbing brake noise (squeak or stutter) in brake systems.

For drivers who often within the extreme range of the braking load are the sintered metal models a way to increase the long life!

Compatibility
Avid Code (2007-2010), Code 5, Code 7

Material
Sintermetal
Weight: 27g

Color
Green

Our organic brake pads offer:
- Long life
- Very good cold braking performance
- Very good braking performance on cold, dryness or wetness
- Optimal braking and long life in the mid-temperature range
- Low noise
- Creates possibly the remedy at disturbing brake noise
- Asbestos free

Our sintered metal pads offer:
(Sintered metal pads are not provided for all Brake Models)
- Long life
- Very good braking performance at very high temperatures and high-speed
- Consistent Braking at high continuous loading
- Optimal braking action and long life at very high temperatures
- Very good braking performance in dry or wet conditions
- Asbestos free

Recommendation and information on the application range of different REVERSE brake pad types:
What is to be used - sintered metal or organic brake pads?

REVERSE Components brake pads are perfectly suited for all biker of Tour / XC to DH!

The REVERSE Organic brake lining unfolds the full braking force already in the cold state. In extreme range at high temperatures with constant load, the wear is slightly larger.

Sintered metal pads have their full braking force in the middle to high temperature range and are therefore somewhat more durable under extreme loads. When cold, the sintered metal pads are a little less "snappy" as an Organic brake pad. But only briefly in the beginning with the first 1-2 braking maneuvers. Then the pad is at operating temperature. However, it does not mean that a cold sintered metal brake pad brakes bad! But a small difference is noticeable!

Conclusion: In most cases, 80% of drivers with the Organic brake pads are perfectly equipped, because the price / performance and braking behavior. Furthermore, Organic suitable coverings to in brake systems with brake disturbing noises (squealing or stutter) any remedy. Furthermore, organic brake pads can reduce disturbing brake noise (squeak or stutter) in brake systems.

For drivers who often within the extreme range of the braking load are the sintered metal models a way to increase the long life!

Compatibility
Magura Marta 2009, Louise 2007/2008, Louise Bat

Material
Steel back plate and organic pad
Weight: 20g

Color
Green

Our organic brake pads offer:
- Long life
- Very good cold braking performance
- Very good braking performance on cold, dryness or wetness
- Optimal braking and long life in the mid-temperature range
- Low noise
- Creates possibly the remedy at disturbing brake noise
- Asbestos free

Our sintered metal pads offer:
(Sintered metal pads are not provided for all Brake Models)
- Long life
- Very good braking performance at very high temperatures and high-speed
- Consistent Braking at high continuous loading
- Optimal braking action and long life at very high temperatures
- Very good braking performance in dry or wet conditions
- Asbestos free

Recommendation and information on the application range of different REVERSE brake pad types:
What is to be used - sintered metal or organic brake pads?

REVERSE Components brake pads are perfectly suited for all biker of Tour / XC to DH!

The REVERSE Organic brake lining unfolds the full braking force already in the cold state. In extreme range at high temperatures with constant load, the wear is slightly larger.

Sintered metal pads have their full braking force in the middle to high temperature range and are therefore somewhat more durable under extreme loads. When cold, the sintered metal pads are a little less "snappy" as an Organic brake pad. But only briefly in the beginning with the first 1-2 braking maneuvers. Then the pad is at operating temperature. However, it does not mean that a cold sintered metal brake pad brakes bad! But a small difference is noticeable!

Conclusion: In most cases, 80% of drivers with the Organic brake pads are perfectly equipped, because the price / performance and braking behavior. Furthermore, Organic suitable coverings to in brake systems with brake disturbing noises (squealing or stutter) any remedy. Furthermore, organic brake pads can reduce disturbing brake noise (squeak or stutter) in brake systems.

For drivers who often within the extreme range of the braking load are the sintered metal models a way to increase the long life!

Compatibility
Hayes HFX-MAG, HFX-9, Promax

Material
Steel back plate and organic pad
Weight: 21g

Color
Green

Our organic brake pads offer:
- Long life
- Very good cold braking performance
- Very good braking performance on cold, dryness or wetness
- Optimal braking and long life in the mid-temperature range
- Low noise
- Creates possibly the remedy at disturbing brake noise
- Asbestos free

Our sintered metal pads offer:
(Sintered metal pads are not provided for all Brake Models)
- Long life
- Very good braking performance at very high temperatures and high-speed
- Consistent Braking at high continuous loading
- Optimal braking action and long life at very high temperatures
- Very good braking performance in dry or wet conditions
- Asbestos free

Recommendation and information on the application range of different REVERSE brake pad types:
What is to be used - sintered metal or organic brake pads?

REVERSE Components brake pads are perfectly suited for all biker of Tour / XC to DH!

The REVERSE Organic brake lining unfolds the full braking force already in the cold state. In extreme range at high temperatures with constant load, the wear is slightly larger.

Sintered metal pads have their full braking force in the middle to high temperature range and are therefore somewhat more durable under extreme loads. When cold, the sintered metal pads are a little less "snappy" as an Organic brake pad. But only briefly in the beginning with the first 1-2 braking maneuvers. Then the pad is at operating temperature. However, it does not mean that a cold sintered metal brake pad brakes bad! But a small difference is noticeable!

Conclusion: In most cases, 80% of drivers with the Organic brake pads are perfectly equipped, because the price / performance and braking behavior. Furthermore, Organic suitable coverings to in brake systems with brake disturbing noises (squealing or stutter) any remedy. Furthermore, organic brake pads can reduce disturbing brake noise (squeak or stutter) in brake systems.

For drivers who often within the extreme range of the braking load are the sintered metal models a way to increase the long life!

Compatibility
Formula Oro

Material
Steel back plate and organic pad
Weight: 19g

Color
Green

Our organic brake pads offer:
- Long life
- Very good cold braking performance
- Very good braking performance on cold, dryness or wetness
- Optimal braking and long life in the mid-temperature range
- Low noise
- Creates possibly the remedy at disturbing brake noise
- Asbestos free

Our sintered metal pads offer:
(Sintered metal pads are not provided for all Brake Models)
- Long life
- Very good braking performance at very high temperatures and high-speed
- Consistent Braking at high continuous loading
- Optimal braking action and long life at very high temperatures
- Very good braking performance in dry or wet conditions
- Asbestos free

Recommendation and information on the application range of different REVERSE brake pad types:
What is to be used - sintered metal or organic brake pads?

REVERSE Components brake pads are perfectly suited for all biker of Tour / XC to DH!

The REVERSE Organic brake lining unfolds the full braking force already in the cold state. In extreme range at high temperatures with constant load, the wear is slightly larger.

Sintered metal pads have their full braking force in the middle to high temperature range and are therefore somewhat more durable under extreme loads. When cold, the sintered metal pads are a little less "snappy" as an Organic brake pad. But only briefly in the beginning with the first 1-2 braking maneuvers. Then the pad is at operating temperature. However, it does not mean that a cold sintered metal brake pad brakes bad! But a small difference is noticeable!

Conclusion: In most cases, 80% of drivers with the Organic brake pads are perfectly equipped, because the price / performance and braking behavior. Furthermore, Organic suitable coverings to in brake systems with brake disturbing noises (squealing or stutter) any remedy. Furthermore, organic brake pads can reduce disturbing brake noise (squeak or stutter) in brake systems.

For drivers who often within the extreme range of the braking load are the sintered metal models a way to increase the long life!

Attention!
Due to the production, there are color deviations between the steel pins and the aluminum pins.

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 9g

Material
Steel

Color
Black

Material
Steel

Features
4 x Allen screw M6 x 18mm
Weight: 23g (+/- 5% production tolerance)

Color
Green

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 3g

Material
Aluminum

Color
Black

Material
Steel

Features
4 x Allen screw M6 x 18mm
Weight: 23g (+/- 5% production tolerance)

Color
Red

This stem is Enduro!
No discipline is as broad as the "Enduro" segment. The Bikes used here are true all-rounders which can used on the big all day rides to DH level bike park excursions. And that's what the Black One was built for!

The Black One is for the rider who pushes hard on their aggressive trail/enduro bike and needs stiffness, strength and responsiveness to match. We built the Black One stem to be durable, create quick handling and with a wide clamping to provide stiffness while running 760-800 mm+ handlebars.

This stem was tested in the toughest fatigue lab test available. Even after hundreds of thousands of load changes in the lab, this stem could not be brought to its limits.

The Black One Enduro weighs in at just 137 g still the lightest stem on the market in its class!

Features
- Length: 50 mm
- Clamping diameter: Ø 31.8 mm
- Angle: 8°
- Stack height: 40 mm
- Clamping platform: 50 mm
- Ø head tube: 1 1/8"
- Weight: 137 g (+/- 5% weight tolerance)
- Construction type: CNC machined
- Material: Aluminium 6061 T6

Extras
- Micro adjustment lines: for better orientation in the alignment of the handlebar

Color
Black/Blue

This stem is Enduro!
No discipline is as broad as the "Enduro" segment. The Bikes used here are true all-rounders which can used on the big all day rides to DH level bike park excursions. And that's what the Black One was built for!

The Black One is for the rider who pushes hard on their aggressive trail/enduro bike and needs stiffness, strength and responsiveness to match. We built the Black One stem to be durable, create quick handling and with a wide clamping to provide stiffness while running 760-800 mm+ handlebars.

This stem was tested in the toughest fatigue lab test available. Even after hundreds of thousands of load changes in the lab, this stem could not be brought to its limits.

The Black One Enduro weighs in at just 137 g still the lightest stem on the market in its class!

Features
- Length: 50 mm
- Clamping diameter: Ø 31.8 mm
- Angle: 8°
- Stack height: 40 mm
- Clamping platform: 50 mm
- Ø head tube: 1 1/8"
- Weight: 137 g (+/- 5% weight tolerance)
- Construction type: CNC machined
- Material: Aluminium 6061 T6

Extras
- Micro adjustment lines: for better orientation in the alignment of the handlebar

Color
Black/Candy

This stem is Enduro!
No discipline is as broad as the "Enduro" segment. The Bikes used here are true all-rounders which can used on the big all day rides to DH level bike park excursions. And that's what the Black One was built for!

The Black One is for the rider who pushes hard on their aggressive trail/enduro bike and needs stiffness, strength and responsiveness to match. We built the Black One stem to be durable, create quick handling and with a wide clamping to provide stiffness while running 760-800 mm+ handlebars.

This stem was tested in the toughest fatigue lab test available. Even after hundreds of thousands of load changes in the lab, this stem could not be brought to its limits.

The Black One Enduro weighs in at just 137 g still the lightest stem on the market in its class!

Features
- Length: 50 mm
- Clamping diameter: Ø 31.8 mm
- Angle: 8°
- Stack height: 40 mm
- Clamping platform: 50 mm
- Ø head tube: 1 1/8"
- Weight: 137 g (+/- 5% weight tolerance)
- Construction type: CNC machined
- Material: Aluminium 6061 T6

Extras
- Micro adjustment lines: for better orientation in the alignment of the handlebar

Color
Black/Grey

This stem is Enduro!
No discipline is as broad as the "Enduro" segment. The Bikes used here are true all-rounders which can used on the big all day rides to DH level bike park excursions. And that's what the Black One was built for!

The Black One is for the rider who pushes hard on their aggressive trail/enduro bike and needs stiffness, strength and responsiveness to match. We built the Black One stem to be durable, create quick handling and with a wide clamping to provide stiffness while running 760-800 mm+ handlebars.

This stem was tested in the toughest fatigue lab test available. Even after hundreds of thousands of load changes in the lab, this stem could not be brought to its limits.

The Black One Enduro weighs in at just 137 g still the lightest stem on the market in its class!

Features
- Length: 50 mm
- Clamping diameter: Ø 31.8 mm
- Angle: 8°
- Stack height: 40 mm
- Clamping platform: 50 mm
- Ø head tube: 1 1/8"
- Weight: 137 g (+/- 5% weight tolerance)
- Construction type: CNC machined
- Material: Aluminium 6061 T6

Extras
- Micro adjustment lines: for better orientation in the alignment of the handlebar

Color
Black/Yellow

This stem is Enduro!
No discipline is as broad as the "Enduro" segment. The Bikes used here are true all-rounders which can used on the big all day rides to DH level bike park excursions. And that's what the Black One was built for!

The Black One is for the rider who pushes hard on their aggressive trail/enduro bike and needs stiffness, strength and responsiveness to match. We built the Black One stem to be durable, create quick handling and with a wide clamping to provide stiffness while running 760-800 mm+ handlebars.

This stem was tested in the toughest fatigue lab test available. Even after hundreds of thousands of load changes in the lab, this stem could not be brought to its limits.

The Black One Enduro weighs in at just 137 g still the lightest stem on the market in its class!

Features
- Length: 50 mm
- Clamping diameter: Ø 31.8 mm
- Angle: 8°
- Stack height: 40 mm
- Clamping platform: 50 mm
- Ø head tube: 1 1/8"
- Weight: 137 g (+/- 5% weight tolerance)
- Construction type: CNC machined
- Material: Aluminium 6061 T6

Extras
- Micro adjustment lines: for better orientation in the alignment of the handlebar

Color
Black/White

This stem is Enduro!
No discipline is as broad as the "Enduro" segment. The Bikes used here are true all-rounders which can used on the big all day rides to DH level bike park excursions. And that's what the Black One was built for!

The Black One is for the rider who pushes hard on their aggressive trail/enduro bike and needs stiffness, strength and responsiveness to match. We built the Black One stem to be durable, create quick handling and with a wide clamping to provide stiffness while running 760-800 mm+ handlebars.

This stem was tested in the toughest fatigue lab test available. Even after hundreds of thousands of load changes in the lab, this stem could not be brought to its limits.

The Black One Enduro weighs in at just 137 g still the lightest stem on the market in its class!

Features
- Length: 50 mm
- Clamping diameter: Ø 31.8 mm
- Angle: 8°
- Stack height: 40 mm
- Clamping platform: 50 mm
- Ø head tube: 1 1/8"
- Weight: 137 g (+/- 5% weight tolerance)
- Construction type: CNC machined
- Material: Aluminium 6061 T6

Extras
- Micro adjustment lines: for better orientation in the alignment of the handlebar

Color
Black/Green

Nico asked for a seat post that was easily adjustable and "bomb proof", so we built it for him!
He needs parts that he can rely on under all circumstances. Thanks to the new seat post head, it is now extremely easy to adjust the angle and fine tune the saddle angle.
This aluminium seat post is so robust that before the post yielded to the test in the EFBE lab, the machine had to be turned off to avoid destroying the tool!

Features
- Length: 350 mm
- Ø: 30.9 mm
- Weight: 269 g (+/- 5% weight tolerance)
- Material: Aluminium

Color
Black/White

Pimp your bike! With the coloured trigger clamps of Reverse you can now pimp another component on your bike!

Material
Aluminum

Features
For Sram-Trigger-Shifters (incl. screw)
Weight: 11g

Color
Purple

Pimp your bike! With the coloured trigger clamps of Reverse you can now pimp another component on your bike!

Material
Aluminum

Features
For Sram-Trigger-Shifters (incl. screw)
Weight: 11g

Color
Candy (paint)

Pimp your bike! With the coloured trigger clamps of Reverse you can now pimp another component on your bike!

Material
Aluminum

Features
For Sram-Trigger-Shifters (incl. screw)
Weight: 11g

Color
Red