Varer på lager

To keep your face and butt clean on muddy days.
Can be cutt easy to your needed size if neccesary.
For fork or rear wheel.

Features
Size: 267x251mm (width x height)
Weight: 26g

Color
Black/White (Eat, Sleep, Shred, Repeat)

Material
Plastic

With this pedal, we've worked to improve shredding for young riders, with better ergonomics to suit smaller feet. With kids bikes being lighter and more capable than ever, it's time to get the components to fit the smaller proportions that kids have.

In our opinion this topic gets too little attention by the bicycle industry. Be it with the Q-factor of the children's bicycles or the oversized pedal surface of the pedals for children's feet!

Both the Q-factor and the support surface of the shoe on the pedal body, were taken into consideration during the development of the Youngstar pedal. The extra-short pedal axle allows a significantly lower Q-factor, which stops the legs being forced into the bow legged "X-position".

This makes it much easier for the kids and leads to a more circular rotations. Due to the smaller pedal surface for kids feet, the pedal flipping is reduced. Imagine you have to stand on a pedal the size of an A4 sheet! You will definitely tip backwards or forwards, since you could never really stand on the middle of such a pedal! The Youngstar is much smaller, making it much easier to find the point of balance.
With its weight of just 229 g, this aluminium pedal pair with CrMo axle is tough, durable but will be lighter than most pedals out there.

Note: Fits for children up to shoe size 34 (US size 3).

Features
- Pedal size: 70 x 62 mm
- Pedal height: 20 mm
- Pedal thread: 9/16"
- Bearings: 2 x industrial bearing
- Weight: 229 g in pair (+/- 5% weight tolerance)
- Material: Aluminium (pedal) CrMo (axle)

Extras
- Shortened pedal axle
- Adapted pedal body
- CrMo axle
- Sealed industrial bearings
- Pedal washer: to protect the crankset thread
- Height adjustable pins (0 mm to 4 mm)

Color
Black

Features
1 piece 26" rim tape super strong
Width: 14mm
Weight: 25g

Features
Weight: 8g
Bolt: M6/32mm

Material
Aluminum

Color
Black

Dyed bro rammebeskytter.
Hold sykkelen din fri for riper med DyedBro rammebeskytter kit.
Pakken inneholder åtte tape-deler, for overrør, underrør og kjedestag.
Beskytteren passer alle sykler, og beskytter de mest utsatte områdene for unødig slitasje!

Montering

Se her hvordan beskyttelsen monteres enklest:

Colour match your ride! Our 2 piece alloy / steel disc rotor gives you a ton of options for your custom build. Our high performance steel braking surface provides you the optimum brake power and the alloy spider keeps the weight low.
Available for all brake models.

Features
- Size: 160 mm
- Wall thickness: 1.8 mm
- Mount: IS 6 bolt
- Compatibility: No restrictions
- Weight: 104 g (+/- 5% weight tolerance)
- Material: Steel (Disc) / Aluminium (Star)

Extras
- Anodized and laser engraved

Color
Black

Compatibility: Only with our AirCon Cooling Fins!
Shimano: Saint/Zee

Our AirCon Replacement Pads are suitable for our AirCon Cooling Fins and are made with an extremely thin alloy backplate to fit in the caliper. No need to buy expensive brake pads with fins, just reuse the fins and save resources.

Material
Steel back plate and organic pad

Benefit: Reuse your AirCon cooling fins to save money and save the planet.

Weight: 16g

Less heat = more power
Heat Management is the major problem for most brake systems. This is why we worked in the development process with one of the biggest brake suppliers in the industry to develop a solution to improve performance. We came up with the AirCon System - an efficient heat dissipation system for all brakes.

Due to a clever and simple 3 piece Disc Rotor with cooling fins we were able to reduce the maximum temperature of the brake. In fact, 50 °C less temperature after a one minute braking - and the disc recovered to room temperature 20sec earlier.

What you will experience on the trail is that your brake will not fade that easy and that your brake will have more power due to the optimized heat dissipation. Combine our AirCon disc with our new AirCon Disc Pads to increase the function of the system even further.

Features
- Size: 180 mm
- Mount: IS 6 bolt
- Compatibility: No restrictions (except for Fox 32, QR15 x 100)
- Weight: 149 g (+/- 5% weight tolerance)
- Material: Steel (Disc) / Aluminium (Cooling fins and Star)

Extras
- Improved cooling rate by up to 7 %, better braking performance
- Anodized and laser engraved

Color
Black

Less heat = more power
Heat Management is the major problem for most brake systems. This is why we worked in the development process with one of the biggest brake suppliers in the industry to develop a solution to improve performance. We came up with the AirCon System - an efficient heat dissipation system for all brakes.

Due to a clever and simple 3 piece Disc Rotor with cooling fins we were able to reduce the maximum temperature of the brake. In fact, 50 °C less temperature after a one minute braking - and the disc recovered to room temperature 20sec earlier.

What you will experience on the trail is that your brake will not fade that easy and that your brake will have more power due to the optimized heat dissipation. Combine our AirCon disc with our new AirCon Disc Pads to increase the function of the system even further.

Features
- Size: 160 mm
- Mount: IS 6 bolt
- Compatibility: No restrictions (except for Fox 32, QR15 x 100)
- Weight: 126 g (+/- 5% weight tolerance)
- Material: Steel (Disc) / Aluminium (Cooling fins and Star)

Extras
- Improved cooling rate by up to 7 %, better braking performance
- Anodized and laser engraved

Color
Black

Compatibility
Formula Oro

Material
Steel back plate and organic pad
Weight: 19g

Color
Green

Our organic brake pads offer:
- Long life
- Very good cold braking performance
- Very good braking performance on cold, dryness or wetness
- Optimal braking and long life in the mid-temperature range
- Low noise
- Creates possibly the remedy at disturbing brake noise
- Asbestos free

Our sintered metal pads offer:
(Sintered metal pads are not provided for all Brake Models)
- Long life
- Very good braking performance at very high temperatures and high-speed
- Consistent Braking at high continuous loading
- Optimal braking action and long life at very high temperatures
- Very good braking performance in dry or wet conditions
- Asbestos free

Recommendation and information on the application range of different REVERSE brake pad types:
What is to be used - sintered metal or organic brake pads?

REVERSE Components brake pads are perfectly suited for all biker of Tour / XC to DH!

The REVERSE Organic brake lining unfolds the full braking force already in the cold state. In extreme range at high temperatures with constant load, the wear is slightly larger.

Sintered metal pads have their full braking force in the middle to high temperature range and are therefore somewhat more durable under extreme loads. When cold, the sintered metal pads are a little less "snappy" as an Organic brake pad. But only briefly in the beginning with the first 1-2 braking maneuvers. Then the pad is at operating temperature. However, it does not mean that a cold sintered metal brake pad brakes bad! But a small difference is noticeable!

Conclusion: In most cases, 80% of drivers with the Organic brake pads are perfectly equipped, because the price / performance and braking behavior. Furthermore, Organic suitable coverings to in brake systems with brake disturbing noises (squealing or stutter) any remedy. Furthermore, organic brake pads can reduce disturbing brake noise (squeak or stutter) in brake systems.

For drivers who often within the extreme range of the braking load are the sintered metal models a way to increase the long life!

Compatibility
Avid Juiyc 3/5/7, carbon, Ultimate BB7 Mechanical

Material
Steel back plate and organic pad
Weight: 22g

Color
Green

Our organic brake pads offer:
- Long life
- Very good cold braking performance
- Very good braking performance on cold, dryness or wetness
- Optimal braking and long life in the mid-temperature range
- Low noise
- Creates possibly the remedy at disturbing brake noise
- Asbestos free

Our sintered metal pads offer:
(Sintered metal pads are not provided for all Brake Models)
- Long life
- Very good braking performance at very high temperatures and high-speed
- Consistent Braking at high continuous loading
- Optimal braking action and long life at very high temperatures
- Very good braking performance in dry or wet conditions
- Asbestos free

Recommendation and information on the application range of different REVERSE brake pad types:
What is to be used - sintered metal or organic brake pads?

REVERSE Components brake pads are perfectly suited for all biker of Tour / XC to DH!

The REVERSE Organic brake lining unfolds the full braking force already in the cold state. In extreme range at high temperatures with constant load, the wear is slightly larger.

Sintered metal pads have their full braking force in the middle to high temperature range and are therefore somewhat more durable under extreme loads. When cold, the sintered metal pads are a little less "snappy" as an Organic brake pad. But only briefly in the beginning with the first 1-2 braking maneuvers. Then the pad is at operating temperature. However, it does not mean that a cold sintered metal brake pad brakes bad! But a small difference is noticeable!

Conclusion: In most cases, 80% of drivers with the Organic brake pads are perfectly equipped, because the price / performance and braking behavior. Furthermore, Organic suitable coverings to in brake systems with brake disturbing noises (squealing or stutter) any remedy. Furthermore, organic brake pads can reduce disturbing brake noise (squeak or stutter) in brake systems.

For drivers who often within the extreme range of the braking load are the sintered metal models a way to increase the long life!

Material
Steel

Features
4 x Allen screw M6 x 18mm
Weight: 23g (+/- 5% production tolerance)

Color
Red

To keep your face and butt clean on muddy days.
Can be cutt easy to your needed size if neccesary.
For fork or rear wheel.

Features
Size: 267x251mm (width x height)
Weight: 26g

Color
Reverse Digi- Camo

Material
Plastic

Nico asked for a seat post that was easily adjustable and "bomb proof", so we built it for him!
He needs parts that he can rely on under all circumstances. Thanks to the new seat post head, it is now extremely easy to adjust the angle and fine tune the saddle angle.
This aluminium seat post is so robust that before the post yielded to the test in the EFBE lab, the machine had to be turned off to avoid destroying the tool!

Our base handlebar is one of the most popular handlebars in the community. With a width of 790 mm, it can be used in Downhill as well as for All mountain and Enduro riding.

A wide handlebar is still the best choice to put as much pressure on the front wheel as possible and supports the driver in the best possible way. Built from double butted 7075 aluminium, this handlebar always gives you confidence and safety, even for toughest abuse!

The handlebar shown here with a clamping size of 35.0 mm, which is a well-established diameter on the market these days. The two rise versions of the Base 790 make it easy to fit the individual needs of riders and adapt the cockpit to personal preferences.

We have reworked our popular X1-B chainguide and created a modular design with more options. The new open design allows you to mount the guide without taking off the crank. The Transformer bashguard can handle two positions depending on your used chainring size.
High position up to 34T - Low position up to 38T.

Material
Aluminum 6061-T6

Features
Mount: ISCG 05
Size: 28-34T or 36-38T
Weight: 165g with Taco (+/- 5% production tolerance)
Finish: Anodized
Taco: Yes
Spezials: For use in high and low position

Color
Black/White

Pimp your bike! With the coloured trigger clamps of Reverse you can now pimp another component on your bike!

Material
Aluminum

Features
For Sram-Trigger-Shifters (incl. screw)
Weight: 11g

Color
Orange

Material
Aluminum 7075

Features
Size: 34,9mm
Allen screw: 5mm
Weight: 26g

Color
Sand-Metallic

POC Oseus VPD Elbow – Når du trenger albuer som tåler alt

Full bevegelse. Solid beskyttelse. Laget for å krasje med stil.

POC Oseus VPD Elbow er bygget for ryttere som ikke tar snarveier. Enten du digger teknisk stisykling, bikepark eller DH i høy fart – disse albuebeskytterne gir deg trygghet uten å ofre komfort.

Med Level 2-sertifisert VPD-teknologi får du maksimal beskyttelse som former seg etter armen og stivner ved slag. De sitter tight med ventilert neopren og stretch-paneler, slik at du kan klatre, droppe og gønne på uten at de sklir eller hemmer deg.

🛠️ Spesifikasjoner:

• CE EN 1621-1, Level 2 – toppnivå albuebeskyttelse

• VPD-materiale for fleksibilitet + høy støtabsorbering

• Forsterket beskyttelse på utsatte områder

• Elastiske grippers og ventilerende materialer

• Designet for all-season bruk – tåler kulde og varme

POCito Joint VPD Air – Beskyttelse som føles som en superkraft

Lett. Fleksibel. Solid. Akkurat som barna våre trenger.

POCito Joint VPD Air er albue- og knebeskyttere laget for unge shreddere med stor fart og enda større ambisjoner. De bruker samme teknologi som de voksne versjonene, men er spesialtilpasset mindre kropper – med lav vekt, høy komfort og maksimalt bevegelsesrom.

Med VPD Air-materiale får kidsa en beskyttelse som er myk og bevegelig under sykling, men som stivner ved slag for å absorbere støt. Det gir trygghet uten å gå på bekostning av moroa – perfekt til alt fra pumptrack til stisykling og bikepark.

📌 Spesifikasjoner:

• VPD Air padding – lett og ventilert med høy støtdemping

• Forsterket stretch-materiale med silikon grippers for perfekt passform

• Kan brukes både som albue- og knebeskyttere for mindre barn

• Komfortabel nok til å brukes hele dagen

• Designet for å holde tritt med energien deres

black tapered 1,5" - 1 1/8"

The set includes 2x10mm and 2x5mm in one color.

Material
Aluminum

Features
For 1 1/8" steerer tubes (Ø28,6mm)
Size and weight:
5mm (2,6g)
10mm (4,7g)

Color
Red