reverse

Standard Quick Release with 5mm Axle.

Material
Axle: CrMo
Lever: Aluminum

Features
Ø 5mm
Weight: 56g

With the tapered Angle-Spacer forks (crow race), you can fine tune and modernise the geometry of your bike.

This simple spacer allows you to make the steering angle half a degree (- 0.5°) slacker, enabling you to get even more performance out of the bike on steep and gnarly descents.
The spacer replaces the conventional crown race and is mounted between the fork crown and headset.
The Angle-Spacer can be used with any headset with 45° ball bearings. (45° ball bearings are installed in 95% of all bikes).

To use the Angle Spacer, simply take the fork out of the frame and then remove the existing crown race from the fork crown.
The Angle-Spacer is mounted directly above the fork crown where the old fork Crown Race was previously located.

The use of the Angle-Spacer does not change the stability and stiffness of the fork in any way.
This results in a more modern geometry, providing a more stable ride at high speeds and on the steep stuff!

Features
- Assembly height: 10 mm
- Weight: 19 g (+/- 5% weight tolerance)
- Outside diameter Ø: 51.0mm
- Material: Aluminium

Tune your DH bikes' geometry.

The DH Angle-Spacer is for 1.5" head tubes reduced to 1 1/8" stems of double crown forks.

The DH angle spacer makes the head angle half a degree (- 0.5°) slacker which allows you to get even more performance out of the bike on steep and gnarly descents!
The spacer replaces the conventional crown race and is mounted between the fork crown and headset.
The Angle-Spacer can be used with any headset with 45° ball bearings. (45° ball bearings are installed in 95% of all bikes)

The DH Angle Spacer is wider than the standard 1 1/8 spacer (Ø 62mm) and fits perfectly to wide 1.5" head tubes.
To use the Angle Spacer, simply take the fork out of the frame and then remove the existing fork crown race from the fork crown.
The Angle-Spacer is mounted directly above the fork crown where the old fork Crown Race was before.

The use of the Angle-Spacer does not change the stability and stiffness of the fork in any way. It can be mounted on any bike without hesitation.
This gives you a more modern, aggressive geometry with more stability for fast, steep and rough tracks!


Features
- Assembly height: 10 mm
- Weight: 61 g (+/- 5% weight tolerance)
- Outside diameter Ø: 61.0mm
- Inner diameter 1 1/8"
- Material: Aluminium

With the Angle-Spacer for 1 1/8" forks, you can fine tune and modernise the geometry of your bike.

This simple spacer allows you to make the steering angle half a degree (- 0.5°) slacker, enabling you to get even more performance out of the bike on steep and gnarly descents.
The spacer replaces the conventional crown race and is mounted between the fork crown and headset.
The Angle-Spacer can be used with any headset with 45° ball bearings. (45° ball bearings are installed in 95% of all bikes).

To use the Angle Spacer, simply take the fork out of the frame and then remove the existing crown race from the fork crown.
The Angle-Spacer is mounted directly above the fork crown where the old fork Crown Race was previously located.

The use of the Angle-Spacer does not change the stability and stiffness of the fork in any way.
This results in a more modern geometry, providing a more stable ride at high speeds and on the steep stuff!

Features
- Assembly height: 10 mm
- Weight: 33.8 g (+/- 5% weight tolerance)
- Outside diameter Ø: 51.0mm
- Inner diameter 1 1/8"
- Material: Aluminium

*Image similar

BASE *untz untz untz*

Brei og masse grep!
Base er Reverse sin nyeste pedal, og over 20 år med erfaring har kulminert i dette produktet, så det passer bedre, og varer lengre.

Reverse sine egenutviklede "Baurillium" foringer sørger for at pedalen varer lenge, og krever ekstremt lite vedlikehold.

En stor konkav platform sørger for at foten din sitter godt i pedalen.

Uansett om du driver med utfor, freeride, dirt, pumptrack eller bare sykler.. dette er en DIGG pedal som du kan stole på at vil vare lenge.

Nico Vink signature grips er laget etter Nico's spesifikasjoner.
De er no fuz, relativt tynne og med en spesiell struktur på lamellene som alltid lar deg ha full kontroll på styret ditt! 

"What I like most about this grip is that it always does what it should!
Perfect grip, feedback and damping even when it's hard and rough.
The width and the diameter fit perfectly to my hands and the Lock Rings with the Chip Bar Ends have taken any abuse I put onto them so far! "

-Nico Vink

- Grip pattern: Reverse lamellar
- Diameter: Ø 30 mm
- Width: 130 mm
- Weight: 109 g (+/- 5% weight tolerance)
- Material: Reverse medium compound / aluminium (lock rings + chip bar-ends)

Refill kit for tubeless tire repair kit (without tools).

Features
10 x Repair-strip 1,5 mm
10 x Repair-strip 3,5 mm
Weight: 11g

This 4-piece repair set is a lifesaver in the event of a large puncture when out on the trail. With a few simple steps, punctures can be repaired quickly, to get you back on the trail , with no pushing that bike back home. The kit includes the rasp tool, insertion tool and a bunch of Repair-strip to fill holes in the tire that your sealant can't fill.
Repair-strip refill packs are also available!

Features
1 x rasp tool
1 x insert tool
5 x Repair-strip 1,5 mm
5 x Repair-strip 3,5 mm
Weight: 29g

Attention!
Due to the production, there are color deviations between the steel pins and the aluminum pins.

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 9g

Material
Steel

Color
Black

Attention!
Due to the production, there are color deviations between the steel pins and the aluminum pins.

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 9g

Material
Steel

Color
Blue

Attention!
Due to the production, there are color deviations between the steel pins and the aluminum pins.

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 9g

Material
Steel

Color
Purple

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 3g

Material
Aluminum

Color
Black

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 3g

Material
Aluminum

Color
Blue

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 3g

Material
Aluminum

Color
Gold

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 3g

Material
Aluminum

Color
Green

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 3g

Material
Aluminum

Color
Light-Blue

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 3g

Material
Aluminum

Color
Light-Green

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 3g

Material
Aluminum

Color
Orange

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 3g

Material
Aluminum

Color
Purple

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 3g

Material
Aluminum

Color
Red

Attention!
Due to the production, there are color deviations between the steel pins and the aluminum pins.

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 9g

Material
Steel

Color
Gold

Attention!
Due to the production, there are color deviations between the steel pins and the aluminum pins.

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 9g

Material
Steel

Color
Green

Attention!
Due to the production, there are color deviations between the steel pins and the aluminum pins.

Compatible with Reverse Black One and Reverse Escape Pro pedal.

Features
Quantity: 10 pieces
Length: 11mm
Thread: 8mm, type US-size ANSI 6-32
Weight: 9g

Material
Steel

Color
Red

Adapterset for EVO 9 (also EVO 1) front hub!

Info
For the conversion of the EVO 9 hub adapter (5mm, 9mm, 15mm, 20mm) you need basically the Basic Adapter!

Material
Aluminum

Features
Basic Adapter
Weight: 12g

Color
Black